Uni-Hydro PRO 150 Ton Ironworker
In the World of Uni-Hydro’s immense ironworkers the Model PRO 150-24 stands above the rest. These ironworkers are the definition of monstrous, with a reputation for tremendous punching ability given the shear mass of support and design. The separate punch arm can be built with a 12-24” throat and creates so much power, any fabrication job is done with ease.
Uni-Hydro’s PRO Series Dual Operator models are designed with separate cylinders allowing operators to run both the punching station and the back shearing section, which includes a flat bar shear, a power cavity and a notching station.
FEATURES:
150-ton open throat punch
Four different work stations can be used without retooling stations
Manual punch aligner - Punches and dies can be aligned without lowering machine under power
Two-stage hydraulic pump
Two-cylinder design maximizes machine strength, safety, reliability and life
24″ bar shear with 4-sided blades
Magnetic starter for safety and reliability
Fixed or adjustable bar shear hold-down
Portable electric foot control
Built for forklift handling
Variable stroke control
Grease bank for lubricating machine with covers in place
* Can configure with multiple deeper throat depths as an option
PRO Series 150 ton ironworker Specifications
Model PRO 150-24
Tonnage 150
Throat Depth 12"-24”
Punch
1-7/8” hole in 1"
2-1⁄4” hole in 13/16”
Bar Shear
1/2" x 24", 5/8” x 20”, 3/4” x 18”, 1” x 14”
Angle Shear 90°
Slug Type - 6" x 6" x 1/2"
Sever Cut - 6" x 6" x 3/8"
Miter Angle 45°
Slug Type - 4" x 4" x 1/2"
Sever Cut - 4" x 4" x 3/8"
Rod Shear
Round (Max) - 1-1/2"
Square (Max) - 1-1/2”
V Coper Notcher 90°
Notcher Station 4" x 4" x 5/16”
Punch/Power Cavity 4" x 4" x 1/2”
Square Notcher
Notcher Station 3" x 3" x 5/16”
Punch/Power Cavity 3" x 3" x 3/8”
Pipe Notcher (Sch 40 or 80)
1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4”, 2" - Larger avail
Brake
6", 9”, 14”, 18”, 24” capacity
Channel Shear
2", 3", 4", 5”, 6”, 7”, 8”
Strokes Per Min
Light Material - 40
Max Capacity - 8
Hydraulics 3,000 psi
Oil Capacity 28 gallons
Motor
Standard - 7.5 HP / 220v / 3ph
Optional - 7.5 HP / 1ph
Dimensions
(L x W x H) 79" x 46" x 91-1/2"
Bar Shear Work Height - 32-1/2"
Punch Table Top Height - 39"
Cavity Table Top Height - 43"
Notcher Station Work Height - 43”
Weight - 8,000 lbs
Station Tooling Options:
Optional Accessories:
Uni-Hydro Inc. reserves the right to change specifications and options for machine models at any time without notice. Available options and tooling may vary depending on specific model capacity, all of which are outlined in formal quotes generated by our sales team. Photos of machinery may show optional tooling for marketing purposes.
Quick Links To Additional Models:
30 Ton | 40 Ton Turret | 45 Ton | 56 Ton | 56 Ton 5624 | 56 Ton Super Turret | 80 Ton
PRO 56-14 | PRO 80-24 | PRO 105-24 | PRO 125-24 | PRO 135-24 | PRO 150-24